Mipa 4+1 Acrylfiller HS Primer Grey 1L
MIPA 4 + 1 Acrylfiller 2K HS High Build Primer creates the perfect base for over-painting with a topcoat. Its qualities include high build, fast drying, excellent sanding ability and has high solid content. Best results are obtained using MIPA H5 or H10 activator.
Using this MIPA H5 2K Extra Fast Activator the curing time is 30 min @ 60ºC (140ºF).
Specifically designed for the automotive refinish industry.
- Product Code: 4+1-1L
- Brand: Mipa
- Availability: In Stock
Buying in Bulk? Trade Discounts Available. Contact us for more information
Mipa 4+1 Acrylfiller HS has very good filling properties and is very easy to sand. This filler can be used as a compact as well as a high-build filler / Primer.
The combination with Mipa H5 Activator allows a very quick processing followed by heat-drying or drying at room temperature.
This offers saving time in terms of spray booth occupancy, stoving times as well as working time.
It is also suitable to fill partial areas (Spot repair) without sinkage or visible marks on the outer rim.
Another application option when using Mipa H5 Activator is the wet-on-wet application, after which the surface can be overcoated after only a very short intermediate drying of only 10 minutes at room temperature.
Hardener by volume (Primer: hardener)
Mipa H10 / H5- and MS-Hardeners -- 4 : 1
Mipa 2K-HS-Hardeners -- 6 : 1
50 - 60 min with Mipa 2K-Hardener H 5 / HS 5 at 20 °C
1,5 - 2 h with Mipa 2K-Hardener H 10 / MS 10 / HS 10 at 20 °C
Mipa 2K-Thinner V 25
5 - 8 min between coats
10 - 15 min before oven drying
Storage: at least 3 years in unopened original containers
VOC Regulation: EU limit value for this product (category B/c): 540 g/l This product contains max. 500 g/l of VOC.
Processing conditions: From +10 °C and up to 80 % relative air humidity. Ensure adequate air ventilation.