Rustoleum 3302 CombiPrimer Adhesion Primer
Rustoleum 3302 CombiPrimer Adhesion is for use on galvanised steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, dense surfaces that normal paints cannot stick to. CombiPrimer Adhesion is best brushed or sprayed onto a surface and after 30 minutes needs to be overcoated by either CombiColor Gloss or CombiColor Satin as soon as possible. This is to ensure that no dirt or dust gets trapped on the tacky surface and ensures maximum adhesion.
Product Information
Recommended Adhesion primer for CombiColor Gloss or CombiColor Satin
Ideal for galvanised steel
Also adheres to aluminium, PVC, stainless steel, etc.
To recoat after 30 minutes
Transparent blue appearance
Very high coverage: Aerosol = 4.4m² per 400ml / Brush applied = 35m² per litre
Technical
Density: 0,87
Solids content in volume: 7%
Heat Resistance: 100°C (dry heat)
Drying Times At 20°C/RH 50%
Touch dry: Remains tacky
Dry to handle: Remains tacky
Dry to recoat: After ½ hours but within 24 hours
Theoretical Consumption
35 m²/l
Practical Consumption
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Please note: you must recoat or apply a topcoat as soon as possible after 30 mins.
We also stock Rustoleum CombiPrimer Anti-Corrosion, this primer is ideal to use on steel surfaces when rust and corrosion protection is needed.