Free Standard shipping on orders over £50 + VAT on orders placed before Midday.

brayt t4 protection liquid 1l

Brayt T4 emulsion for surface refreshment, leaves invisible protective layer against impurities. Extends the showroom finish of the clearcoat by up to 50% longer and improves impurities on the car body up to 80%. This product might be used to protect lacquered surfaces, gelcoats and polycarbonates. T4 has also light abrasive properties what allows to remove small defects and holograms. Suitable to gelcoats and each type of clear coats (acrylic, water based, bicomponent and fabric coatings), also on ceramic scratch resistant coatings. Enhances gloss, prevents the oxidation of the varnish, protects against UV rays, acid rain, resin. To achieve high gloss without the mist and holograms, soft foam is advised.

  • £47.52+ VAT

  • Product Code: TRO-300005448
  • Brand: Brayt
  • Availability: In Stock

Brayt T4 emulsion for surface refreshment, leaves invisible protective layer against impurities. Extends the showroom finish of the clearcoat by up to 50% longer and improves impurities on the car body up to 80%. This product might be used to protect lacquered surfaces, gelcoats and polycarbonates. T4 has also light abrasive properties what allows to remove small defects and holograms. Suitable to gelcoats and each type of clear coats (acrylic, water based, bicomponent and fabric coatings), also on ceramic scratch resistant coatings. Enhances gloss, prevents the oxidation of the varnish, protects against UV rays, acid rain, resin. To achieve high gloss without the mist and holograms, soft foam is advised.


  • Cut level 2/10
  • Gloss level 10/10


Advantages

  • Protects the surface min. for 6 months
  • Can work on each type of surface
  • Water based product
  • Very easy application
  • Contains UV filters
  • Dedicated to manual and mechanical work


Application

  • Surface must be dry.
  • Apply a small amount of product on the surface (it is recommended to polish small surface, partially).
  • Work with light pressure on the polisher with soft foam.
  • Decrease the pressure on the polisher to work successfully and achieve expected effect.
  • Leave 30-60 min. after application to create protective layer.
  • Remove the residues with microfiber cloth or by DA polisher with soft foam.
  • Do not apply on unpolimerized surfaces.

Brayt T4 Protect Liquid msds (164.47 KB)Download
Brayt T4 Protect Liquid tds (297.00 KB)Download